Underdesk Mount For Audient Evo8 Audio Interface

(Big thank you to Mr. Adams for providing me with those pictures after they received their Evo8 mount!)
In the picture you can see the Evo8 mount in combination with long arms.
This is a modular under desk mount for the Audient Evo8 Audio Interface.
So you can keep your desk cable and clutter free and at the same time to give you the option to comfortably reach your audio interface if you still need to!

The mount is a 3 piece construction with two arms attaching to the interface holder on each side with the help of 4 M4 hex screws in total.
These two arms will also attach to the underside of your desk with a maximum of 4 M4 wood screws (not included), if you put one screw in the front hole of each arm that will be plenty enough support for the Evo4 and any outgoing cables, but if you want to be extra sure then you can use all 4 mounting holes!

You have two option to choose when it comes to the length of the arms.
The short arms are for people (like me), who are only using the front ports of the interface. It gives you about 1cm of clearance between the interface and the underside of your desk. So you can still remove it from the mount without any problems or you can mount a slim USB Hub over it.

If you have XLR devices or/and monitors with some thick cables connected to your Evo8, please choose the long arms! So your cables will have enough space (ca. 4cm) and won't push against the underside of your desk!

You have also the option to get one headphone hanger with the mount, so you can hang your headphones or spare headphones on one of the sides of the mount.

If you decide to put the mount on your desk I would strongly recommend using small rubber pads to prevent the holder from slipping around your desk.

If you have any questions or requests, don't hesitate to message me!
All pieces (excluding the screws) are 3D printed, so the print lines and texture are visible due to the nature of 3D printing.
The prints will be cleaned before assembly and shipping.
Surface finish and material may differ from the shown pictures, due to the use of different printers/filament.